Maxview Roam 5G COMBO60 handleiding
Handleiding
Je bekijkt pagina 7 van 44
! Allow the Flexible Adhesive to cure as per the manufacturers guidelines before travel.
7
Front of
vehicle
X = 2mm
Y = 25mm
X
Y
X
X
X
Choose a location, ensure the antenna is positioned
on a flat surface and is clear from obstructions.
Use the included template and drill 5 x 2mm holes.
Use hole position (Y) as a pilot hole to drill a larger
25mm hole. Clean up hole, ensuring the location of
the Mounting Foot is clean and clear from debris
and dirt.
Position the Mounting Foot and press down firmly.
3
Apply sealant generously to the wet seal channel,
ensuring the bead is consistent in size with no gaps.
2
OPTIONAL - For optimum secure mounting, use the
4 supplied Roof Fixing Screws, to secure the
Mounting Foot to the vehicle roof.
4
If your roof thickness is between 19-40mm, you
can screw the Foot Clamp into the Mounting Foot
underside to cover the hole inside the vehicle.
Note: The Clamping Tool can
be cut down to suit your
vehicle roof thickness.
Turn anti-clockwise until
tight and secure Foot Clamp
with the Foot Clamp Screw.
Installation of the Mounting Foot is now complete.
5
1
19-40mm
Place the Antenna Head Unit onto the Mounting Foot.
Tighten the 4 Foot Mounting Bolts by hand with an
Allen Key.
We recommend the use of a Torque Wrench set to
3.5Nm.
Installing the Antenna Head Unit
6
Bekijk gratis de handleiding van Maxview Roam 5G COMBO60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Maxview |
| Model | Roam 5G COMBO60 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8812 MB |
