Maxview Roam 5G COMBO60 handleiding
Handleiding
Je bekijkt pagina 13 van 44
13
1. Position Router Bracket and mark hole positions.
Depending on material, drill a pilot hole or use a
bradawl. Mount the Router Bracket to the surface
using the 4 x No.6 Screws provided.
Note: Make sure the ‘Maxview Logo’ is
horizontal and in the correct orientation.
Router Installation
!
2. Attach the antenna coaxial cables to the top row
of connectors. These are marked ‘mobile’. Note the
order of the cables. These must be connected as
shown above for the best performance.
IMPORTANT - To prevent damage take
care to ensure the centre pins are
aligned before attaching the connector.
!
!
Please Note:
When fitting the Signal Booster and Router, there should be as much distance between the
two units as possible. The TV Coax cable and Router SMA cables should also not be routed
next to each other wherever possible. This will reduce the potential for interference between
the two systems.
!
✗
✓
Bekijk gratis de handleiding van Maxview Roam 5G COMBO60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Maxview |
| Model | Roam 5G COMBO60 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8812 MB |
