Handleiding
Je bekijkt pagina 10 van 20
BLUE = NEUTRAL, BROWN = LIVE, GREEN & YELLOW = EARTH
As the colours of the wires in the mains lead for the appliance may
not correspond with the coloured markings identifying the terminals
connecting to the fused spur, proceed as follows:
• The wire which is coloured green & yellow must be connected to
the terminal marked E (Earth) or coloured green.
• The wire which is coloured blue must be connected to the
terminal marked N (Neutral) or coloured black or blue.
10
• The wire which is coloured brown must be connected to the
terminal marked L (Live) or coloured red or brown.
If the mains cable of this appliance is damaged, it must only be
replaced by a CDA approved service engineer, agent, or other
suitably qualified person.
IMPORTANT – ONLY USE A 3 AMP FUSE
The use of a 13A fuse can cause internal wiring damage which will
not be covered under the CDA warranty.
Do not mount the electrical isolation switch behind the chimney
section. It is a requirement that you must be able to isolate the
extractor from the mains electrical supply after installation.
Bekijk gratis de handleiding van Matrix MXG060SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Matrix |
| Model | MXG060SS |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1393 MB |
