Handleiding
Je bekijkt pagina 15 van 20
15
there are any other fuel burning appliances in the same room, consult
the relevant British Standard (BS5440) or GAS SAFE document.
Natural gas to LPG conversion
This conversion must only be carried out by a competent person (i.e. a
Gas Safe registered fitter). Instructions to fit replacement injectors:
1. Disconnect the appliance from the gas and electrical supplies.
2. Remove burner components “B” and pan supports (Fig. 9).
3. Remove the injectors “A” (Fig. 9) with a socket spanner and replace
with the corresponding injectors.
Setting up minimum flow rates:
1. Turn on the LPG supply, light the burners and turn the controls to
the minimum position as indicated by the small flame symbol.
2. Remove the control knobs “M” (Fig. 10).
3. Insert a small screwdriver “D” (Fig. 10) into the hole at the top of the
tap “C” and turn the adjustment screw left or right until the flame of
the burner is conveniently regulated to the low position.
4. Make sure when turning quickly from maximum position to
minimum position that the flame does not extinguish.
5. Replace the knobs “M”.
Fig. 9
A
B
C
D
M
Fig. 10
Bekijk gratis de handleiding van Matrix MXG030SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Matrix |
| Model | MXG030SS |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1393 MB |
