Master TH 5 handleiding
Handleiding
Je bekijkt pagina 13 van 80
en
it
de
es
fr
nl
pt
da
no
sv
pl
ru
cs
hu
sl
tr
hr
lt
lv
et
ro
sk
bg
uk
bs
el
zh
7. CONNECTION AND OPERATION
WARNING: Carefully read the “SAFETY INFORMATION” before switching on the heater.
NOTE: If the room temperature is higher than the temperature set on the thermostat, the heater does not
go on.
►►►ROOM THERMOSTAT --MODEL 1-- (PIC. 1):
►►7.1. OPERATION:
►7.1.1. Connect the power cable of the room thermostat to the mains (PIC. 4).
►7.1.2. Connect the power cable of the heater to the room thermostat (PIC. 5).
►7.1.3. Turn on the heater and set the desired temperature by turning the knob (PIC. 6).
►►►ROOM THERMOSTAT --MODEL 2-- (PIC. 2):
►►7.2. OPERATION:
►7.2.1. Remove the plug connected to the heater and connect the room thermostat to the heater (PIC. 7).
►7.2.2. Turn on the heater and set the desired temperature by turning the knob (PIC. 6).
►►►DIGITAL ROOM THERMOSTAT --MODEL 3-- (PIC. 3):
►►7.3.1. THERMOSTAT SETTING:
This menu allows you to set and adjust the operating parameters of the room thermostat.
Access the menu as follows:
►Press the buttons “+” / “-” (D PIC. 8) simultaneously for a few seconds, and “C.O.S.t.“ will appear on the
display (A PIC. 8).
►Press “SET“ (C PIC. 8) to move around the menu, until the desired setting appears on the display (A
PIC. 8). Refer to the table below as a reference [press the buttons “+” / “-” (D PIC. 8) to set the correct
setting]:
PARAMETER PRESET DESCRIPTION
diFF 0,2 °C Sets the “ON/OFF“ dierential
tEnP °C Unit of measurement “°C” / “°F“
Ad.tE 0.2 °C Correction of the temperature probe
rY.OC 1 Type of probe (Correct setting 1)
►Press “SET“ (C PIC. 8) to conrm the setting.
►Press and hold “SET“ (C PIC. 8) for a few seconds to exit the menu.
►►7.3.2. OPERATION:
►Press “SET“ (C PIC. 8) to enter the temperature setting menu.
►Press the buttons “+” / “-” (D PIC. 8) to set the desired temperature.
►Press “SET“ (C PIC. 8) to conrm and exit the menu.
NOTE: During heater mode, the “FLAME (HEATING ON)” or “SNOW (COOLING ON)” (B PIC. 8) LEDs
light up to indicate the status of the room thermostat.
►►7.3.3. DISPLAY OF RECORDED TEMPERATURES:
►Pressing “+“ (D PIC. 8) displays the maximum temperature recorded.
►Pressing “-“ (D PIC. 8) displays the minimum temperature recorded.
NOTE: Reset the log by pressing and holding “+“ (D PIC. 8) for a few seconds and “CLEA“ will appear on
the display (A PIC. 8).
Bekijk gratis de handleiding van Master TH 5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Master |
| Model | TH 5 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10650 MB |
