Master Kitchen MKHI 7714 1BR BK handleiding
Handleiding
Je bekijkt pagina 42 van 60

11
T
ouch the ON/OFF control for three seconds.
After power on,
the buzzer beeps once, all displays show “–” or “– –”, indicating
that the induction hob has entered the state of standby mode.
P
lace a suitable pan on the cooking zone that you wish to use.
• M
ake sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
T
ouching the heating zone slider control ,
a
nd a indicator next
to the key will flash.
S
elect a heat setting by touching the slider control
• If you don’t choose a heat setting within 1 minute, the
Induction hob will automatically switch off. You will need to
start again at step 1.
• You can modify the heat setting at any time during
cooking.
If the display flashes alternately with the heat setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you’re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is placed on it.
3.3.2 Finish cooking
Touching the heating zone selection control that you wish
to switch off.
Turn the cooking zone off by touching the slider to “ ”.
Make sure the display shows “0”.
power up
power down
Bekijk gratis de handleiding van Master Kitchen MKHI 7714 1BR BK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Master Kitchen |
| Model | MKHI 7714 1BR BK |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5954 MB |







