Master Kitchen MKHI 604 BK handleiding
Handleiding
Je bekijkt pagina 35 van 52
Select a heat setting by touching the slider control
• If you don‘t choose a heat setting within 1 minute, the Induction
hob will automatically switch off. You will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
If the display flashes alternately with the heat setting
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you‘re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically turn off after 2 minutes if no suitable pan is placed on it.
3.3.2 Finish cooking
Touching the heating zone selection control that you wish to
switch off.
Turn the cooking zone off by touching the slider to ―○‖. Make sure
the display shows ―0‖.
Turn the whole cooktop off by touching the ON/OFF control.
Beware of hot surfaces
H will show which cooking zone is hot to touch. It will
disappear when the surface has cooled down to a safe
temperature. It can also be used as an energy saving function
if you want to heat further pans, use the hotplate that is still
hot.
EN-11
power down
power up
Bekijk gratis de handleiding van Master Kitchen MKHI 604 BK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Master Kitchen |
| Model | MKHI 604 BK |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 5259 MB |
