Master Kitchen MKHI 16014-ED 2BR BK Handleiding (56 Pagina's)

Handleiding

3.4 How to use

3.4.1 Start cooking

Touch the ON/OFF control. After power on, the buzzer beeps

once, timer control show “00”, heating zone selection controls

show “ ” or “ ” or “ ”, indicating that the induction hob has

entered the state of standby mode.

Place a suitable pan on the cooking zone that you wish to use.

• Make sure the bottom of the pan and the surface of the

cooking zone are clean and dry.

Touching the heating zone selection control and an indicator

where you touched will flash

Adjust heat setting by touching the slider control.

• If you don’t choose a heat setting within 1 minute, the

Induction hob will automatically switch off. You will need to

start again at step 1.

• You can modify the heat setting at any time during

cooking.

If the display flashes alternately with the heat setting

This means that:

• you have not placed a pan on the correct cooking zone or,

• the pan you’re using is not suitable for induction cooking or,

• the pan is too small or not properly centered on the cooking zone.

No heating takes place unless there is a suitable pan on the cooking zone.

The display will automatically turn off after 1 minute if no suitable pan is placed on it.

3.4.2 Finish cooking

Touching the heating zone selection control that you wish to switch

off.

Turn the cooking zone off by touching the slider to the left. Make

sure the display shows “0”.

Turn the whole cooktop off by touching the ON/OFF control.

EN-11

power up

power down

Bekijk gratis de handleiding van Master Kitchen MKHI 16014-ED 2BR BK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.