Master E48202 handleiding
Handleiding
Je bekijkt pagina 11 van 40
en
NOTE: The blades of every appliance are bal-
anced, therefore, they must all be installed in
the same direction and must not be changed,
bent or used with blades from other applianc-
es.
►►5. INSTALLATION
(Fig. 3):
IMPORTANT: Install the appliance at a safe
distance of 50 cm from walls or other objects
(the appliance can oscillate and cause return
air).
IMPORTANT: The “J” hook and the horizontal
structure where the appliance will be installed
must withstand a minimum load of 110 Kg (in-
stallation can also be carried out on wooden
beams, metal beams, etc. as long as the sup-
port and structure can withstand the weight).
►5.1. Install the “J” hook.
►5.2. Position the appliance onto the “J”
hook.
NOTE: Do not lubricate the “J” hook.
NOTE: If the appliance is installed with the
rod extension, for example on a false ceiling,
make a minimum 6 cm diameter hole.
►►6. INSTALLATION OF THE SAFE-
TY CABLE
IMPORTANT: This appliance includes a sec-
ondary safety cable in compliance with na-
tional requirements and safety standards. The
secondary safety cable must be fastened to a
structural element that can withstand a mini-
mum load of 140 Kg (the structural element
must be approximately 10 cm away from the
appliance).
►6.1. Pass the safety cable behind the hook
(the cable must not pass between the rub-
ber roller and the hook) (Fig. 4).
►6.2. Secure the safety cable to the structur-
al element using metal clips (in order to ob-
tain the maximum possible hold, install the
metal clips in the correct position) (Fig. 5).
►►7. CONNECTION TO THE ELEC-
TRICITY MAINS
(Fig. 6)
IMPORTANT: Disconnect the appliance from
the mains power supply before carrying out
any electrical connections.
Use certied cables and connectors in compli-
ance with local legislations and regulations in
force for electrical connection.
►7.1. Only connect the appliance to electri-
cal mains supply duly provided with a dier-
ential switch and suitable earth (complying
with correct polarity).
►7.2. Place the cable covers in a correct po-
sition (leave half a centimetre of clearance
between the cover and the structural ele-
ment - motor).
►7.3. Restore electrical power supply.
►7.4. After completing installation, test cor-
rect operation.
NOTE: In the case of remote control instal-
lation, refer to the instructions in the acces-
sory’s package.
►►8. CLEANING AND MAINTENANCE
IMPORTANT: Before carrying out any main-
tenance or repairs, disconnect the appliance
from the mains power supply.
Depending on the environment where the
appliance is used, dust or dirt can aect per-
formance of the unit. Before carrying out any
cleaning or maintenance, disconnect the ap-
pliance from the mains power supply.
It is only permitted to clean the appliance from
dust with a slightly damp cloth. It is forbidden
to use solvents of detergents.
NOTE: In order to prevent serious injury, it is
forbidden to wet or lubricate the appliance.
Bekijk gratis de handleiding van Master E48202, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Master |
| Model | E48202 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2604 MB |
