Master-Bilt QS2 handleiding
Handleiding
Je bekijkt pagina 8 van 104
8
8/22 Rev. R 132617 ©2022 Refrigerated Solutions Group. All rights reserved.
GENERAL INFORMATION
FO
AM PANEL STORAGE
If foam walk-in panels require storage at the job site prior to installation, the following steps must be taken to protect
the panels against both staining from moisture and sunlight and denting by workers and traffic.
Whenever possible, the panels should be stored indoors, and should remain in the crating pallet they were originally
shipped in. If the panels were uncrated as they were unloaded from the delivery truck, and they are being stored
indoors, they should be stored vertically on skids with spacers between the panels.
When storing panels in a vertical position, always place the female rail (grooved) edge down (see illustration below.)
This method of storing panels will provide proper ventilation, permit drain-off of condensation moisture and protect
panels against the formation of white rust stains.
If the panels must be stored outdoors, follow the same procedure as indicated for indoor storage WITH THIS
ADDITION: Cover the panels completely with an opaque polyethylene water-proof material to protect against rain,
snow, heat and sunlight.
The illustration below shows the method for storage outdoors when panels are not left in palletized crates.
Note: RSG always recommends equipment to be installed once received but understands storage may be required.
RSG does not guarantee issues related to storage, such as handling damage, storage damage, panel aging, etc.
We would recommend the locks be oiled and the panels be wiped down with a white oil.
Bekijk gratis de handleiding van Master-Bilt QS2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Master-Bilt |
| Model | QS2 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 40845 MB |