Master-Bilt MSF-52AN handleiding
Handleiding
Je bekijkt pagina 3 van 7
5/16 Rev. A 57-02499
STORAGE
The appliance is suitable for storing ice cream and ready-frozen foods.
It must not be filled higher than the stacking mark on the inside of the freezer.
LOAD LINE
LED Light
DEFROSTING
1.
Defrost when the frost thickness on the cabinet wall reaches ¼” to optimize the freezing capacity.
2.
Turn the temperature control to the lowest point for 5-6 hours before defrosting.
3.
Cut off the power and remove product, use the defrost removal tool that comes with the freezer, never use
sharp tools.
4.
After defrosting, clean the wall with dry cloth, and then power back on.
THE FOLLOWING CONDITIONS ARE NORMAL
1.
There is a sound of flowing water when the refrigerant is running.
2.
Frozen food will not melt even the power is off for a few hours.
3.
When the ambient humidity is high, moisture can condense on the surface of the freezer.
4.
When the unit is running the condenser and compressor will be hot.
COMPONENTS - MODELS MSC-31A/MSC-41A/MSC-49A/MSC-66A
1.
Sliding Upper Lid
2.
Electrical Cord
3.
Control Panel
4.
Castors
5.
Thermometer
6.
LED Light
Bekijk gratis de handleiding van Master-Bilt MSF-52AN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Master-Bilt |
| Model | MSF-52AN |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 888 MB |