Martin VDO Sceptron XB handleiding
Handleiding
Je bekijkt pagina 7 van 75
Martin
®
VDO Sceptron XB User Manual Rev. B 7
System installation
Warning! Read “Safety information” and “Precautions to avoid damage” in the
VDO Sceptron XB Safety and Installation Manual supplied with products and
included at the end of this User Manual before installing a VDO Sceptron XB
system.
Connect the VDO Sceptron XB only to the devices and using only the Martin
cables specified in this User Manual and the VDO Sceptron XB Safety and
Installation Manual.
Do not exceed the maximum numbers of devices that can be connected in
chains and maximum cable lengths specified in the VDO Sceptron XB Safety
and Installation Manual and in the manuals of the other devices in the system.
Install all devices as described in their Safety and Installation and their User
Manuals. All Martin user documentation is available for download from
www.martin.com.
The VDO Sceptron XB is designed to display either Martin P3 video or DMX-controlled lighting effects.
It automatically recognizes and responds to either a Martin P3, Art-Net or sACN data signal. When
VDO Sceptron XB fixtures are used in a P3-driven setup, you can still control them using an Art-Net or
sACN signal that is connected to the P3 System Controller.
See the VDO Sceptron XB area of www.martin.com for details of the range of accessories, related
devices, pre-assembled cables, bulk cable and connectors available from Martin.
Your Martin supplier will be happy to help you plan your installation and select the most suitable
devices and hardware for any given installation.
Creating a chain of VDO Sceptron XB fixtures
To create a daisy chain of VDO Sceptron XB fixtures:
1. Connect the fixtures together in a chain either directly using the fixtures’ cable tails with DCE
connectors or by adding Martin hybrid extension cables with DCE connectors. Do not exceed the
maximum total length of fixtures and total chain length given in the VDO Sceptron XB Safety and
Installation Manual.
2. Install closing caps on the output connectors of the last fixtures on each chain in order to protect
from water, dirt, etc.
P3 PowerPort and DCE PSU 240 IP devices
Devices in the Martin P3 PowerPort family and the Martin DCE PSU 240 IP let you convert AC mains
power to 48 VDC power, combine the DC power with a data signal and send it to VDO Sceptron XB
fixtures over hybrid (DC power and data) cable with DCE-type connectors.
Regardless of which model of P3 PowerPort you use or whether you use the DCE PSU 240 IP, you
can always choose freely what control protocol you prefer to use. Simply send Art-Net, sACN or Martin
P3 into the P3 PowerPort (or DCE PSU) and the system will auto-detect.
Bekijk gratis de handleiding van Martin VDO Sceptron XB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin |
| Model | VDO Sceptron XB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9624 MB |
