Martin VDO Sceptron XB handleiding
Handleiding
Je bekijkt pagina 5 van 75
Martin
®
VDO Sceptron XB User Manual Rev. B 5
Introduction
Warning! Before installing, operating or servicing the VDO Sceptron XB
creative LED lighting system, read the latest version of the VDO Sceptron XB
Safety and Installation Manual, paying particular attention to the Safety
Precautions section. The Safety and Installation Manual is supplied with
products and also included at the back of this user manual.
Important! Full specifications for VDO Sceptron XB products and accessories
are available in the VDO Sceptron XB area of the Martin® website at
www.martin.com.
Thank you for selecting the VDO Sceptron XB from Martin.
This User Guide is a supplement to the Safety and Installation Manual that is supplied with products
and attached to the back of this User Manual. This combined User Manual plus Safety and Installation
Manual is available for download from the VDO Sceptron XB area of the Martin website. The User
Manual contains information that is mainly of interest for lighting designers and operators, whereas the
Safety and Installation Manual contains important information for all users, especially installers and
technicians.
We recommend that you check the Martin website regularly for updated documentation. We publish
revised versions each time we can improve the quality of the information we provide and each time we
release new firmware with changes or new features. Each time we revise this guide we list any
important changes on page 2 so that you can keep track of updates.
VDO Sceptron XB
The VDO Sceptron XB from Martin is a powerful, compact and energy-efficient LED batten fixture
designed to be used in a creative video installation or as a lighting fixture. Fixtures are available in the
following lengths:
• 320 mm fixture with 32 x RGBW pixels, and
• 1000 mm fixture with 100 x RGBW pixels.
The fixture’s linear array of LEDs is encapsulated in resin in an aluminum profile to give a rugged
IP65-rated fixture that is suitable for permanent and temporary indoor use and temporary outdoor use.
Clip-on optical accessories available from Martin allow the appearance and lighting characteristics of
fixtures to be changed in seconds. A hybrid (power and data) cabling system allows VDO Sceptron
fixtures to be daisy-chained for easy setup and minimal cabling.
Depending on DMX mode, pixels can be controlled together or separately. Fixtures can be controlled
using video mapping via a Martin P3 System Controller or using DMX via any Art-Net or sACN DMX
controller. Basic and Extended DMX Modes also let you crossfade between P3 and DMX control of
fixtures.
You can use P3 or RDM via Art-Net to set up fixtures, including setting up standalone operation in
which fixtures can display up to 20 scenes with individual hold and fade times, with external control not
required. Protocol detection is automatic.
Precautions to avoid damage
Important! To get the best out of the VDO Sceptron XB and avoid causing damage that is not covered
by the product warranty, read the following information carefully. Make sure that everyone who is
involved in working on or using the VDO Sceptron XB has read and understood this information.
Excessive dirt buildup causes overheating and may damage the product. Damage caused by
inadequate cleaning is not covered by the product warranty.
Operating temperature precautions
• Exposing the VDO Sceptron XB to direct sunlight or operating it in an ambient temperature that exceeds
the specified maximum of 55° C (131° F) may reduce the lifetime of the product.
Bekijk gratis de handleiding van Martin VDO Sceptron XB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin |
| Model | VDO Sceptron XB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9624 MB |
