Martin VC-Strip handleiding
Handleiding
Je bekijkt pagina 8 van 36
8 VC-Strip™ Family Safety and Installation Guide
under screw heads to prevent any abrasion of PCBs. Mechanical damage to PCB tracks caused by
fastening hardware is not covered by the product warranty.
• Excessive dirt buildup causes overheating and a risk of short-circuits and may damage the product.
Damage caused by inadequate cleaning is not covered by the product warranty.
Operating temperature precautions
• Exposing the VC-Strip to direct sunlight or operating it in an ambient temperature that exceeds the
specified maximum may reduce the lifetime of the product.
• Monitor the VC-Strip’s temperature by calling up temperature readouts on the P3 System Controller. If any
of the product temperature readouts exceed the temperatures given in Table 4, provide fan assistance to
give active cooling to the installation.
• Note that, if the temperature of a VC-Strip module rises to 10° C above the level given in Table 4, a
thermal safety cutout shuts down the module. The module will not function normally again until the
temperature has fallen to a safe level.
Electrostatic discharge precautions
VC-Strip components are sensitive to ESD (electrostatic discharge) and can be damaged if you do not take
the following precautions:
• Attach an ESD wrist strap to your wrist and connect its ground (earth) lead to a known ground (earth)
before handling the VC-Strip.
• Hold the VC-Strip by its edges only. Do not touch any part of a VC-Strip module apart from the connectors
and the control button. Do not touch connector pins.
• Place the VC-Strip on grounded (earthed) surfaces only.
• Store the VC-Strip only in its ESD shielding bag and do not remove it until you are ready to install it. Place
it in an ESD shielding bag immediately if you remove it from an installation.
• Protect the VC-Strip from ESD in the installation location. Differences in electrical potential between the
VC-Strip and any object it comes into contact with may cause damage that is not covered by the product
warranty.
VC-Strip module Fan assistance required from:
VC-Strip 15 68° C
VC-Strip 25 60° C
VC-Strip 30 59° C
VC-Strip 60 66° C
Table 4: Maximum temperature levels before fan assistance is required
Bekijk gratis de handleiding van Martin VC-Strip, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin |
| Model | VC-Strip |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3742 MB |
