Martin VC-Strip handleiding
Handleiding
Je bekijkt pagina 24 van 36
24 VC-Strip™ Family Safety and Installation Guide
Testing, rebooting and returning to defaults
The tables below list the functions of the control button on each VC-Strip module.
Test patterns are stored in onboard memory. This lets you test the LEDs without an external controller.
However, test patterns can also be called up on P3 system controllers and the P3 PowerPort 1500.
Button action Function
Short press The first press displays status as shown in Table 6 for a few seconds.
The next presses display the following test patterns on the LEDs (one
short press scrolls to next pattern):
- Calibrated white
- Full red
- Full green
- Full blue
- Scrolling gradient
- Dimmed (20% uncalibrated white)
Press and hold until
LEDs 1-4 light blue
Reboot the VC-Strip.
Press and hold until
LEDs 1-4 light
white
Return the VC-Strip to its default factory firmware.
Table 7: Control button functions
Bekijk gratis de handleiding van Martin VC-Strip, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin |
| Model | VC-Strip |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3742 MB |
