Martin VC-Grid 30 handleiding
Handleiding
Je bekijkt pagina 7 van 32
Introduction 7
Introduction
Thank you for selecting a product from the Martin VC-Grid™ family. These compact LED-based display
modules are designed to integrate into a Martin P3™ video system to display video from a variety of
sources, and they can also be controlled using DMX. Use of an RDM-compliant DMX controller allows
two-way communication and remote management of VC-Grid modules from the controller.
The VC-Grid combines flexibility and simplicity with high-quality video display capabilities. Used with or
without a front diffuser, multiple VC-Grids can be combined in ways that give exceptional creative flexibility.
A hybrid power and data cabling system allows VC-Grids to be daisy-chained for easy setup and minimal
cabling.
The VC-Grid is a square array of LEDs arranged on a rigid module. It offers the following features:
• RGB color
• Various pixel pitch (center-to-center LED distance) options: 15, 25, 30 or 60 mm
• Three pixel layout options: 4x4, 8x8 or 16x16 LEDs per module
• Individually controllable pixels
• High-quality 16-bit per color image processing technology
• Pixel-level brightness and color calibration for optimal image quality
• P3 and DMX control with automatic protocol detection
• Intuitive pixel mapping and addressing using a Martin P3 system controller
• Single hybrid cable for power and data input and throughput
• External power and data processor (Martin P3 PowerPort™) and simple cabling system.
For dimensions drawings of all the products in the VC-Grid family, please see the VC-Grid Product Support
pages on the Martin website at www.martin.com
The naming convention for the VC family is as follows:
Martin user documentation is supplied with products. Please check that you have the latest version available
by checking the product’s support page on the Martin website at http://www.martin.com. Besides the latest
user documentation, the support pages also provide the latest specifications, firmware updates and support
information for Martin products.
Martin welcomes input from users. Comments or suggestions regarding this manual can be e-mailed to
service@martin.dk or posted to: Martin Professional ApS, Olof Palmes Allé 44, DK-8200 Aarhus N,
Denmark.
Unpacking
The VC-Grid is supplied in anti-static packaging, Leave products in their packaging until you are ready to
install them.
Precautions to avoid damage
Important! To get the best out of the VC-Grid and avoid causing damage that is not covered by the
product warranty, read the following information carefully. Make sure that everyone who is involved
in working on or using the VC-Grid has read and understood this information.
• The VC-Grid is not designed to allow hot-plugging. Shut down power and data before connecting or
disconnecting modules, or you are very likely to cause damage that is not covered by the product
warranty.
• PCB tracks can be damaged if metal screws are tightened directly onto VC-Grid modules. Protect PCBs
from damage by adding non-conductive protective material such as plastic PCB washers or spacers
under screw heads to prevent any abrasion of PCBs. Mechanical damage to PCB tracks caused by
fastening hardware is not covered by the product warranty.
VC-Grid 16x16 15
VC-Grid 8x8 25
Product name Pixel layout Pixel pitch
Bekijk gratis de handleiding van Martin VC-Grid 30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin |
| Model | VC-Grid 30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4360 MB |
