Martin RUSH Scanner 1 LED handleiding
Handleiding
Je bekijkt pagina 29 van 48
RUSH™ Scanner 1 LED User Manual 29
To clean the fixture:
1. Disconnect the fixture from power and allow it to cool for at least 10
minutes.
2. Vacuum or gently blow away dust and loose particles from the outside of
the fixture and the air vents with low-pressure compressed air.
3. Clean the mirror and LED lenses by wiping gently with a soft, clean lint-
free cloth moistened with a weak detergent solution. Do not rub the
surface hard: lift particles off with a soft repeated press. Dry with a soft,
clean, lint-free cloth or low-pressure compressed air. Remove stuck
particles with an unscented tissue or cotton swab moistened with glass
cleaner or distilled water.
4. Check that the fixture is dry before reapplying power.
Fuse replacement
If you need to replace a fuse:
1. Disconnect the fixture from power and allow it to cool for at least 10
minutes.
2. Unscrew the cap of the fuse holder (shown on page 10) and remove the
fuse. Replace with a fuse of the same size and rating only.
3. Reinstall the fuseholder cap before reapplying power.
Bekijk gratis de handleiding van Martin RUSH Scanner 1 LED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin |
| Model | RUSH Scanner 1 LED |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3279 MB |