Martin RUSH Scanner 1 LED handleiding
Handleiding
Je bekijkt pagina 25 van 48
RUSH™ Scanner 1 LED User Manual 25
Service functions
Auto test
To perform a complete test of all of the fixture functions:
1. Select AUTO TEST and press ENTER.
2. Press ENTER again. The fixture will run a self-test routine.
3. Press MENU to exit the test.
Reset effects
To reset all effects to their home positions, select RESET and press ENTER.
Factory default settings
To return all the settings in the control menu to their factory defaults,
cancelling any changes made by users:
1. Select PRO DEFAULT and press ENTER.
2. Select YES and press ENTER to confirm.
Other settings
Backlight
Display illumination can be turned on or off. To adjust the backlight settings:
1. Select BACK LIGHT menu and press ENTER.
2. Select ON to illuminate the display or OFF for a dark display.
3. Press ENTER to confirm your selection.
Fan mode
The fan speed can be optimized for maximum light output (AUTO) or minimum
noise (LOW). When LOW is selected, the fan runs more slowly and the LED is
dimmed if necessary to reduce temperature. To change the fan setting:
1. Select FAN MODE and press ENTER.
2. Select AUTO if you want to maximize light output or LOW if you want to
minimize fan noise.
3. Press ENTER to confirm your selection.
Bekijk gratis de handleiding van Martin RUSH Scanner 1 LED, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin |
| Model | RUSH Scanner 1 LED |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3279 MB |