Martin Logan Dynamo 12 handleiding
Handleiding
Je bekijkt pagina 11 van 46
11
ConTrols (ConTinUed)
DSP Preset Modes (via MartinLogan Subwoofer Control App only)
The DSP presets built into the main page of the MartinLogan Subwoofer Control App allow you to alternate
between 3 preset modes: Music, Movie, and Night. Here is a description of the presets:
Music = The most accurate mode, providing the highest levels of articulation and lowest levels of distortion.
Ideal for the most detailed playback of music.
Movie = This mode maximizes the dynamic output of the subwoofer for the most powerful presentation.
Ideal for maximum impact from movies.
Night = This mode reduces and limits the subwoofer’s dynamic output, which may be ideal for late night
playback where avoiding noise complaints is desirable.
20–30Hz Level Control (via MartinLogan Subwoofer Control App)
The 20–30Hz Level Control in the app allows you to adjust the output level of the subwoofer, specifically
targeting the lowest range of frequencies. This control gives you an adjustment range from -10dB to +10dB,
with 0dB being the “flat” setting. Using the app, adjust this setting from your favorite listening position to
your preference. This setting can also be adjusted after using the optional Anthem Room Correction system
without permanently overriding the results of the calibration process. This value is temporarily set to the
default 0dB value during the measurement process, and can be adjusted to taste afterwards if desired.
Anthem Room Correction (Optional: calibration mic sold separately)
This subwoofer is compatible with the award winning Anthem Room Correction system. This highly
advanced software measures subwoofer performance in your room and then performs custom equalization,
tuning, and calibration to achieve the highest levels of bass impact, and accuracy possible in your specific
installation. Requires an ARC Calibration Microphone and PC or Mac computer (sold separately). The ARC
setting in the MartinLogan Subwoofer Control APP allows you to disable or enable the ARC calibration after
it has been uploaded to the subwoofer, allowing you to easily hear the “before” and “after” results.
Phase (via MartinLogan Subwoofer Control App only)
The Phase control is entirely dependent on numerous factors including the size and configuration of your
listening environment, the placement of the unit, and seating arrangement. Due to the way bass sound
waves develop in different rooms; there is no rule of thumb for setting phase. For instance, if your room
has a peak at the subwoofer crossover area, you may wish to set the phase so the actual acoustic outputs
of the subwoofer and main speakers are out of phase. Experiment and try different settings and be patient,
ultimately choose the setting that sounds best to you using a variety of content you like to listen to.
If you are using the subwoofer to augment other MartinLogan products, we suggest starting with the phase
set at 0°. In a system where phase and polarity are properly set, the main speakers and subwoofer should
work together and sound as if there is more total bass in the system. If your main speakers and subwoofers
are out of phase their sound waves will cancel each other and total bass output in the system will sound
decreased.
Bekijk gratis de handleiding van Martin Logan Dynamo 12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin Logan |
| Model | Dynamo 12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3307 MB |
