Martin Logan Abyss 10 handleiding
Handleiding
Je bekijkt pagina 7 van 46
7
To additional
subwoofer
or
Line Level Input (Left In / Right In)
Connect from the Main Out/Pre Out/Sub Out on your receiver/pre-amp/electronic device. The setting for the
Low-Pass Filter control is applied to the signal received through these inputs unless the Low-Pass filter control
is set to Bypass. This subwoofer’s Low-Pass filter is adjusted exclusively through the MartinLogan Subwoofer
Control App. See “App Controls” section on page 10 for more details. The Left and Right inputs will be summed
internally, so the subwoofer will play content from the Left input, Right input or both simultaneously. Either of the
inputs can be used if your device only has a single output.
Trigger Input
12V DC
Right
Sub
Out
Line
Input
ARC Input
Power Mode
Power
Status
100-120V ,FUSE T8.0A H/250V
220-240V ,FUSE T6.3A H/250V
100-120VAC
220-240VAC
Speaker Level Input
Balanced
XLR Input
LFE In
Wireless
Audio
Left In+ – Right In+ –
10
Pair
On Auto
Status
LFE Left
Demo
Tone
Sweep
Control
Sweep
Status
Contains FCC ID: QOQ-GM220P
Contains IC: 5123A-GM220P
CAN ICES-003(B)/NMB-003(B)
TUV Rh ein lan d
Scan to download
Subwoofer Control App
Contains FCC ID: NKR-SWA12
Contains IC: 4441A-SWA12
Trigger
100-120V /220-240V
50-60Hz 500W
LFE Input (RCA or XLR)
This is the most common connection for a subwoofer, and uses a single RCA or XLR style cable. If you have the
option to use XLR, it is recommended to do so. The LFE connection is designed to be used with any device that
has its own built in bass management settings. The subwoofer will not apply additional Low-Pass filtering to the
signal received through the LFE Input. Through the LFE Input, the Low-Pass filtering is handled by the connected
device. The most common devices that use the LFE input on the subwoofer are AV Receivers and Processors, but
other devices like powered speakers or integrated amplifiers may also have their own bass management. If you
aren’t sure if you should use the LFE connection or not, please consult your products owners manual, your dealer,
or MartinLogan.
Subwoofer Out
Not all devices have multiple outputs for subwoofers. To make it easy to add additional subwoofers to a system,
this subwoofer is equipped with a Subwoofer Out connection. The Subwoofer Out uses a single RCA connection
that can be run to an additional subwoofer. This process can be repeated multiple times in order to create a
“chain” of subwoofers if desired. The Subwoofer Out signal is a combination of all active incoming signals. In
other words, whatever signals are actively connected to the various Subwoofer Inputs is what will come out of the
Subwoofer Out connection.
aUdio signal ConneCTions
Bekijk gratis de handleiding van Martin Logan Abyss 10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin Logan |
| Model | Abyss 10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3330 MB |
