Martin Exterior Projection Pro Compact handleiding

Niet gecategoriseerd

Martin

71 pagina's

PDF beschikbaar

Handleiding

Exterior Projection Pro Compact Safety and Installation Manual 7

Shut down power to the entire installation at the main power distribution board and

lock out power before carrying out any installation or maintenance work.

Carry out any work that involves opening the connections compartment on the

back of the fixture in dry conditions only.

Isolate the fixture from power immediately if any seal, cover, cable, or other

component is damaged, defective, deformed or showing signs of overheating. Do

not reapply power until repairs have been completed.

You may install accessories as described in this manual, but refer any service

operation not described in this manual to an authorized Martin Service agent.

Protection from burns and fire

Do not operate the fixture if the ambient temperature (T

) exceeds 45° C (113° F).

Above this temperature, the fixture regulates output to protect from overheating.

The surface of the fixture casing can reach up to 60° C (140° F) during operation.

Avoid contact by persons and materials. Allow the fixture to cool for at least 10

minutes before handling.

Keep flammable materials well away from the fixture. Keep combustible materials

(e.g. fabric, wood, paper) at least 0.1 m (4 ins.) away from the fixture housing.

Ensure that there is free and unobstructed airflow around the fixture.

Do not illuminate surfaces within 0.5 m (1.6 ft.) of the front glass.

Do not modify the fixture in any way not described in this manual or install other

than genuine Martin parts. Do not stick filters, masks or other materials onto any

lens or other optical component. Use only accessories approved by Martin to

modify the light beam.

The fixture’s optical components can focus the sun’s rays, creating a risk of fire

and damage. Do not expose the front of the fixture to sunlight or any other intense

light source.

Protection from eye injury

This fixture is a Risk Group 2 product according to IEC/TR 62778. It emits possibly

hazardous optical radiation. It falls into the Risk Group categories shown below

according to IEC/TR 62778 under worst-case conditions:

The Risk Group distances indicated apply to the light output from one fixture only.

If fixtures can be operated in combination, light intensity can increase and you

should consult a lighting professional for more appropriate safety

recommendations.

0,2 m

(7.9 in.)

1.2 m

(4 ft.)

Bekijk gratis de handleiding van Martin Exterior Projection Pro Compact, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.