Martin Exterior PixLine 20 handleiding
Handleiding
Je bekijkt pagina 7 van 44
Safety information 7
Martin® P3 PowerPort 1000 IP safety limits
If you supply Exterior PixLine fixtures with DC power from an output on a Martin® P3 PowerPort 1000 IP:
• Do not connect more than one linked chain of Exterior PixLine fixtures to one DC output. Since the P3
PowerPort 1000 IP has four DC outputs, you can connect a maximum of four chains of fixtures to one P3
PowerPort 1000 IP.
• Do not exceed the maximum total length of fixtures (including standard and custom lengths) that you can
include in one chain given (see Table 2).
• Do not exceed a maximum total length of 50 m (164 ft.) for a chain, including fixtures and cable, measured
from the P3 PowerPort 1000 IP to the end of the chain (see Table 2).
Besides the above limits, each output of a P3 PowerPort 1000 can drive a maximum of 63 fixtures
regardless of the length of the fixtures. This may affect the Exterior PixLine 40. If you are creating a chain
containing Exterior PixLine 40 320 mm fixtures, you must stop and create a new chain if you reach 63
fixtures.
Martin® IP66 PSU safety limits
You can supply Exterior PixLine fixtures with DC power from a Martin® IP66 PSU 240W external power
supply unit (this unit is identical with the ‘Martin® Tripix Power IP66’). If you use this unit to supply DC
power:
• Do not connect more than one linked chain of Exterior PixLine fixtures to the DC power output of the
Martin® IP66 PSU.
• Do not exceed the maximum total length of fixtures (including standard and custom lengths) that you can
include in one chain given (see Table 3).
• Do not exceed a maximum total length of 50 m (164 ft.) for a chain, including fixtures and cable, measured
from the Martin® IP66 PSU to the end of the chain (see Table 3).
Generic 48 VDC external PSU safety limits
If you supply a chain of Exterior PixLine fixtures with DC power from a 48 VDC external PSU (power
supply unit) that you obtain yourself, you must not exceed the lowest of these limits:
• Do not create a chain that will exceed the maximum power rating of the PSU output used to supply that
chain with power (to find the power consumption of the chain, multiply the number of fixtures in the chain
with the wattage per fixture according to Table 4).
• Do not exceed the maximum total length of fixtures and the maximum total length of cable that you can
connect in one chain (see Table 4). Include the length of all standard and all custom fixtures when
calculating the total length of fixtures.
• Do not create a chain with a total length of more than 50 m (164 ft.).
Type of fixture in
chain
Maximum total length of
fixtures in chain
Maximum total length of
chain (fixtures and
cable)
Exterior PixLine 10 7 m 50 m
Exterior PixLine 20 14 m 50 m
Exterior PixLine 40 27 m 50 m
Table 2: Maximum number of Exterior PixLine fixtures per P3 PowerPort 1000 IP output
Type of fixture in
chain
Maximum total length of
fixtures in chain
Maximum total length of
chain (fixtures and
cable)
Exterior PixLine 10 7 m 50 m
Exterior PixLine 20 14 m 50 m
Exterior PixLine 40 27 m 50 m
Table 3: Maximum number of Exterior PixLine fixtures per Martin® IP66 PSU
Bekijk gratis de handleiding van Martin Exterior PixLine 20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin |
| Model | Exterior PixLine 20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5166 MB |
