Martin Exterior Dot Pro handleiding
Handleiding
Je bekijkt pagina 21 van 60
Martin
®
Exterior Dot-Pro HP User Manual Rev. A 21
Operating the Exterior Dot-HP Pro
Warning! Read the Safety and Installation Manual that is included at the end of this
User Manual, paying particular attention to the Safety Precautions section, before
operating the Exterior Dot-HP Pro.
Note that the output of LEDs, like all light sources, changes gradually over many thousands of hours of
use. If you require products to perform to very precise color specifications, you may eventually need to
make small readjustments at the lighting controller.
Test sequences and fixture status
The Exterior Dot-HP Pro Series Safety and Installation Manual that is included at the end of this User
Manual contains information on displaying fixture status codes and running test sequences that you
may find useful before starting operation.
Controlling via DMX
Once you have set up DMX modes and DMX addresses via RDM, you can control Dots using the
DMX controller that is connected to the installation.
See the ‘DMX protocols’ section at the end of this manual for details of the control options available.
Identifying fixtures in the installation
To help with programming scenes and controlling the installation, it is possible to send an RDM
command that causes a Dot to flash a signal so that you can identify it. To identify a Dot:
1. Black out all Dots if you have been using them.
2. If you are using RDM, send an IDENTIFY DEVICE unicast command to an individual Dot in the
installation. The Dot will respond by flashing white, letting you identify it.
3. If you are using Martin Companion, enable the “Identify” button in the toolbar. Any Dot (or Dots)
that you select will immediately identify itself. With “Identify” enabled, you can also use the arrow
keys to navigate through the list of Dots – each Dot in the list will flash as soon as you reach it.
Bekijk gratis de handleiding van Martin Exterior Dot Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin |
| Model | Exterior Dot Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9000 MB |
