Martin Exterior Dot-9 Pro handleiding
Handleiding
Je bekijkt pagina 5 van 66
Martin
®
Exterior Dot 1/4/9
Pro User Manual Rev. A 5
System installation
Warning! Read the Exterior Dot-1/4/9 Pro Safety and Installation Manual
included at the end of this User Manual before connecting Exterior Dot-1/4/9 Pro
devices to DC power and data.
Warning! Connect the Exterior Dot-1/4/9 Pro only to the devices and using only
the Martin cables specified in this User Manual and in the Exterior Dot-1/4/9 Pro
Safety and Installation Manual.
Warning! Do not exceed the maximum numbers of devices that can be
connected in chains and maximum cable lengths specified in the Exterior Dot-
1/4/9 Pro Safety and Installation Manual and in the manuals of the other devices
in the system.
Important! If using DMX, make sure that the DMX console and DC power
source are at the same earth (ground) potential, or the data signal may become
saturated.
Control protocols
The Exterior Dot-1/4/9 Pro is designed to display either Martin P3-controlled or DMX-controlled lighting
effects. It automatically recognizes and responds to Martin P3, Art-Net, sACN and RDM via Art-Net
and sACN data signals.
Creating an Exterior Dot-1/4/9 Pro display system
See the Exterior Dot-1/4/9 Pro User Manual and the detailed system diagrams available for download
from www.martin.com for details of connecting and setting up an Exterior Dot-1/4/9 Pro system.
To install a system that displays P3 or DMX-controlled creative lighting effects on Exterior Dot-1/4/9
Pro devices:
1. Make sure that no devices in the installation can be connected to AC mains power until all
installation work is complete.
2. Read the Safety and Installation Manual included at the end of this User Manual.
3. Connect Exterior Dot-1/4/9 Pro devices together in chains either directly using the hybrid DCE
connectors on the devices’ cable tails or by adding DCE-to-DCE hybrid extension cables with DCE
connectors available from Martin.
4. Warning! Do not exceed the maximum number of devices per chain given in “Safety limits for
connecting devices” in the Safety and Installation manual included at the end of this User Manual.
5. Install a blanking cap available from Martin on the output connector of the last Exterior Dot-1/4/9
Pro device on each chain to protect from water, dirt etc.
Data and DC power source
Connect the Exterior Dot-1/4/9 Pro to data and DC power at 15 volts from one of the following Martin
devices only:
• Martin Exterior AC-Feeder connected to a data source and to AC mains power.
• Martin Exterior DC-Feeder connected to a data source and to hybrid 48 VDC power.
Follow the instructions in the user documentation of the Exterior AC-Feeder or Exterior DC-Feeder
when connecting these devices.
Using Double-string Cable Adapters
You can use a Double-string Cable Adapter (available from your Martin supplier as an optional
accessory) to split a string of Dots into two as shown in the diagrams on the following pages.
Bear in mind that two strings connected together using a Double-string Cable Adapter cannot be
controlled independently.
If you connect two strings together using a Double-string Cable Adapter, the safety limit for the total
number of Dots per string given in the Safety and Installation Manual that is attached to the back of
this User Manual applies to the total number of Dots on the two strings together. For example, for the
Bekijk gratis de handleiding van Martin Exterior Dot-9 Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin |
| Model | Exterior Dot-9 Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7563 MB |
