Martin Audio WX3A handleiding
Handleiding
Je bekijkt pagina 6 van 17
For balanced operation, the screen should be connected to ground at the
amplifier end. To eliminate ground current loops, it can be lifted at the
WX3A output, provided normal safety requirements have been met (i.e. the
mains earths are correctly connected). See Fig 3.
Fig. 3
5 INITIAL SETTINGS
WX3A units are supplied with the adjustments set as follows:
Mains Voltage - 240V
Ground Switch - ON
Limiter Threshold - 2V setting
Plug-in Board - System specific
6 WX3A SYSTEM CONFIGURATIONS WITH PLUG-IN BOARDS
The WX3A used in conjunction with a plug-in board becomes a dedicated
system controller. Depending on the plug-in system-specific board, the
WX3A is automatically configured either as a stereo 2-way or mono 3-way
device for a specific Wavefront system.
Each plug-in board dictates a system-specific crossover function,
equalisation and in some cases group delay.
Martin Audio – WX3A System Controller
ENGLISH
6
1
2
3
2
1
3
Chassis
Grounded
Shield
Signal
Grounded
Shield
1
2
3
2
1
3
WX3A Output
WX3A Output
Amplifier Input
Amplifier Input
All material © 2007. Martin Audio Ltd. Subject to change without notice.
CONTENTS
<
>
PRINT
GUIDES
Bekijk gratis de handleiding van Martin Audio WX3A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin Audio |
| Model | WX3A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2576 MB |
