Martin Audio MA2.8 Power Amplifier handleiding

Niet gecategoriseerd

Martin Audio

27 pagina's

PDF beschikbaar

Handleiding

Figure 10. MLS switches on rear panel

6 OPERATION MODES

6.1 Stereo operation

For stereo (dual channel) operation, leave the Link and Phase reverse

switches in the un-depressed position. In this mode, both channels operate

independently of each other, with their level attenuators controlling their

respective levels. Never connect either output terminal to ground or in

parallel. The recommended minimum nominal impedance for stereo or

tandem operation, is 2 ohms per channel.

6.2 Tandem mono

For tandem (dual channel-single input) operation, depress the Link switch.

Both channels can now be driven by a signal at either input connector. The

output connection is the same as in stereo mode. You can use either TRS

connectors for linking out etc. Do not use the remaining XLR and TRS

connectors for mixing or other purposes. Both level attenuators are

active, allowing you to set different levels for each channel.

Never connect either output terminal to ground or in parallel.

Martin Audio – MA2.8 Power Amplifier

ENGLISH

-5

-4

-2

1+ CH.B+

1– CH.B–

OUTPUT CH.B

MLS

Switch

GUIDES

CONTENTS

APPLICATIONS GUIDE

Bekijk gratis de handleiding van Martin Audio MA2.8 Power Amplifier, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.