Martin Audio MA18K handleiding
Handleiding
Je bekijkt pagina 33 van 42
All material © 2010 Martin Audio Ltd. Subject to change without notice 32
Set Shape=Linkwitz-Riley (or FIR)
Set Slope=24dB/oct
On CH2, edit Ch Delay to temporal align midrange with highs horn.
On CH2, edit Gain to align levels.
3.12 Setup a bridged configuration
If you already have a preset made for a non-bridged configuration, lets say for the CH2 for example, you
should load the preset, then choose to edit “CH1+2, copy CH2=>CH1”. The CH1 now is identical to CH2.
With this command you can also edit both channels at the same time. Otherwise, you can immediately
choose “CH1+2, copy CH1=>CH2” or “CH1+2, copy CH2=>CH1”, then edit both channels at once.
Remember that, in bridged mode, the 2 DSP channels should be identical to get the right results.
3.2 MA Control Manager Overview
Both the standard and DSP versions of the MA18K may be remote controlled from a PC using the MA
Control Manager software which may be downloaded from the Martin Audio website;-
http://www.mauserguides.com.red-square.net/Ampsoft/ContMan.pdf
The application may be used to control many amplifiers, particularly in an installation environment and offers
a host of extremely useful programming and monitoring facilities.
Amplifiers are connected to a PC using an RS485 convertor and with each assigned a unique address,
connections can either be daisy-chained between amplifiers or connected in star configuration from an
RS485 hub which gives the additional facility of remote power switching
Bekijk gratis de handleiding van Martin Audio MA18K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin Audio |
| Model | MA18K |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12951 MB |
