Martin Audio MA1.6 handleiding
Handleiding
Je bekijkt pagina 10 van 25
Do not use XLR and TRS jacks on the same channel simultaneously
for mixing or other purposes.
Figure 6. Balanced line
To use an unbalanced source, connect pin 3 (ring on TRS jack) to the
shield of the connector. If you leave one pin disconnected, you will lose
6dB in gain.
Figure 7. Unbalanced line connection
A better method for using unbalanced sources is shown in Figure 8. This is
similar to the connection for balanced lines, but pin 3 is connected to the
shield at the source. The hum and noise rejection for the cable is
equivalent to that for a balanced line. To minimize hum in the audio, use
balanced inputs whenever possible.
Figure 8. Balanced line with unbalanced equipment.
Martin Audio – MA1.6 Power Amplifier
ENGLISH
10
1
2
3
1
2
3
2
1
3
Balanced Output
Balanced Output
Amplifier Input
Amplifier Input
Signal
Grounded
Shield
2
1
3
Chassis
Grounded
Shield
1
2
3
1
2
3
2
1
3
Unbalanced Output
Unbalanced Output
Amplifier Input
Amplifier Input
+
+
–
–
1
2
3
1
2
3
2
1
3
Unbalanced Output
Unbalanced Output
Signal
Grounded
Shield
Amplifier Input
Amplifier Input
+
+
–
–
All material © 2007. Martin Audio Ltd. Subject to change without notice.
>
CONTENTS
<
PRINT
GUIDES
Bekijk gratis de handleiding van Martin Audio MA1.6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin Audio |
| Model | MA1.6 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3062 MB |
