Martin Audio Engineer 418 handleiding
Handleiding
Je bekijkt pagina 31 van 80
Engineer 418 & 818 User Manual Page 31
Recalling presets
To recall a preset from the Martin Audio Engineer Remote, just press the ‘Preset’ up or down button, the
display will show ‘selecting’ and the name of the preset. After 3 seconds the currently selected preset is
recalled. Refer to the software chapter for creating and assigning presets.
Changing volumes
To change the volume of a zone, just press one off the ‘Zone’ up or down buttons. The display will show the
zones that have been created in the Engineer Windows® PC software and the MASTER volume. Once the
correct zone is selected, the volume is changed through the ‘Volume’ up and down arrows. Refer to the
software chapter for creating and assigning zones.
ATTENTION: To use the Engineer Remote, DISCONNECT THE PC from the Martin Audio Engineer 418 or
Martin Audio Engineer 818 If the Engineer Remote and the PC are connected at the same time, only the
connection between the PC and the Martin Audio Engineer 418 or Martin Audio 818 will be active.
Bekijk gratis de handleiding van Martin Audio Engineer 418, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin Audio |
| Model | Engineer 418 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11493 MB |
