Martin Audio DX0.6 handleiding
Handleiding
Je bekijkt pagina 12 van 37
Link input
This allows you to link the inputs A and B.
When you link channels, any setting differences remain
unchanged. When you edit a linked channel, the DX0.6
automatically updates linked channels to use the same
setting. Note that any unedited settings will remain
unchanged.
To link inputs
1. Press PM3 to display the Utility Menu.
2. System Utilities will be on the bottom line of the
screen. Press PM1 to select.
3. Rotate PM1 until Link Input appears on the bottom
line of the screen. Then press PM1.
4. A will start flashing to show that you can edit A.
Rotate PM3 to the right for ON and left for OFF.
5. Rotate PM2 so that B starts flashing. Rotate PM3 to
the right for ON and left for OFF.
To link A and B, set A and B to ON.
To unlink A and B, set A and B to
OFF.
6. Press PM2 to return to the System Utilities menu.
7. If you've finished, press PM2 twice to exit the menu
system.
Link output
This allows you to link output channels. For example, you
could link outputs 1 and 2 or you could link all of the
outputs.
When you link channels, any setting differences remain
unchanged. When you edit a linked channel, the DX0.6
automatically updates linked channels to use the same
setting. Note that any unedited settings will remain
unchanged.
To link outputs
1. Press PM3 to display the Utility Menu.
2. System Utilities will be on the bottom line of the
screen. Press PM1 to select.
3. Rotate PM1 until Link Output appears on the bottom
line of the screen. Then press PM1.
4. 1 will start flashing to show that you can edit the
setting for output 1. Rotate PM3 to the right for ON
and to the left for OFF.
5. Rotate PM2 so that 2 starts flashing. Rotate PM3 to
the right for ON and left for OFF.
6. Rotate PM2 to update the settings for the rest of the
outputs. To see outputs 5 and 6, keep rotating to the
right.
Any outputs set to ON are linked.
To link all the outputs, set all the
outputs to ON.
7. Press PM2 to return to the System Utilities menu.
8. If you've finished, press PM2 twice to exit the menu
system.
Linked channel mode
Linked channel mode allows you to choose whether to
keep the gain offset between linked channels or not.
For example:
▪ You have a gain of 0dB for input A and a gain of +3dB
for input B.
▪ You link channels A and B.
▪ You set linked channel mode for inputs to ON.
▪ You update the gain for channel A to +2db. The DX0.6
will automatically update channel B to have a gain of
+5dB (to maintain the offset of 3dB).
▪ You set linked channel mode for inputs to OFF.
▪ You update the gain for channel A to +1db. The DX0.6
will automatically update channel B to have the same
gain of +1dB.
DX0.6 User Guide
12
Bekijk gratis de handleiding van Martin Audio DX0.6, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin Audio |
| Model | DX0.6 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4503 MB |
