Martin Audio Blackline Q10 handleiding
Handleiding
Je bekijkt pagina 25 van 38
Q44 specification
Type Passive two-way compact column
loudspeaker
Frequency
response
1
82 Hz – 17 kHz ± 3 dB, –10 dB @ 63 Hz
Driver (LF) Four 4” (100 mm) with 1” (25 mm) voice
coil, ferrite motor system
Driver (HF) 1" (25 mm) exit compression driver with 1"
(25 mm) voice coil, PETP dome
Rated power
2
200 W AES, 800 W peak
Recommended
electronics
DX0.4, DX0.6 or DX4.0 system processor
and VIA amplifier, or iKON amplifier-
processor
Sensitivity
3
90 dB
Maximum SPL
2,3
113dB continuous, 119dB peak,
125dBpeak with crest factor 4
Nominal impedance 8 ohm
Dispersion
4
Horizontal: 100° on axis, 120° at 15° below
axis
Vertical: 40° total (+15° / –25°)
Crossover 2.4 kHz passive
Enclosure Durable plywood
Finish Black or white textured paint
Protective grille Black or white perforated steel grille with
scrim cloth backing
Connectors 1 x NL4 connector
Pin connections 1+/1–
Fittings 3 x M8 inserts: 1 on top, 1 on left, 1 on right
1 x M6 insert on rear
4 x M6 inserts on rear for wall bracket
1 x pocket handle made from recycled ABS
Pole-mount socket with removable cover
IP rating None
Dimensions (W) 150 mm x (H) 800 mm x (D) 187 mm
(W) 5.9 in x (H) 31.5 in x (D) 7.3 in
Weight 7.5 kg (16.5 lbs)
Accessories
(optional)
Wall bracket WB6/8
M8 eye bolt HTKCT05
Yoke
Transit cover
1
On-axis in open space (4 pi) with full-range preset.
2
Tested for 2 hours with band-limited pink noise as specified in
AES2-1984 (r2003). Peak power defined as 6 dB above AES power.
3
In open space (4pi) at 1 m with 1 watt input, measured in the 2pi
(baffle) region.
4
In open space (4 pi) at 2 m to –6dB.
Q26 specification
Type Passive two-way compact column
loudspeaker
Frequency
response
1
69 Hz – 17 kHz ± 3 dB, –10 dB @ 53 Hz
Driver (LF) Dual 6” (150 mm) with 1.5” (38 mm) voice
coil, ferrite motor system
Driver (HF) 1" (25 mm) exit compression driver with 1"
(25 mm) voice coil, PETP dome
Rated power
2
300 W AES, 1200 W peak
Recommended
electronics
DX0.4, DX0.6 or DX4.0 system processor
and VIA amplifier, or iKON amplifier-
processor
Sensitivity
3
94 dB
Maximum SPL
2,3
119dB continuous, 125dB peak,
131dBpeak with crest factor 4
Nominal impedance 8 ohm
Dispersion
4
Horizontal: 100° on axis, 120° at 15° below
axis
Vertical: 40° total (+15° / –25°)
Crossover 2.4 kHz passive
Enclosure Durable plywood
Finish Black or white textured paint
Protective grille Black or white perforated steel grille with
scrim cloth backing
Connectors 1 x NL4 connector
Pin connections 1+/1–
Fittings 3 x M8 inserts: 1 on top, 1 on left, 1 on right
1 x M6 insert on rear
4 x M6 inserts on rear for wall bracket
1 x pocket handle made from recycled ABS
Pole-mount socket with removable cover
IP rating None
Dimensions (W) 193 mm x (H) 670 mm x (D) 218 mm
(W) 7.6 in x (H) 26.4 in x (D) 8.6 in
Weight 9.5 kg (20.9 lbs)
Accessories
(optional)
Wall bracket WB6/8
M8 eye bolt HTKCT05
Yoke
Transit cover
1
On-axis in open space (4 pi) with full-range preset.
2
Tested for 2 hours with band-limited pink noise as specified in
AES2-1984 (r2003). Peak power defined as 6 dB above AES power.
3
In open space (4pi) at 1 m with 1 watt input, measured in the 2pi
(baffle) region.
4
In open space (4 pi) at 2 m to –6dB.
BlacklineQ User Guide
25
Bekijk gratis de handleiding van Martin Audio Blackline Q10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Martin Audio |
| Model | Blackline Q10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4802 MB |
