Martin Audio Blackline Q10 handleiding
Handleiding
Je bekijkt pagina 11 van 38

Rotating the horn
We supply BlacklineQ speakers ready for installation in
portrait. Before using in landscape, you need to rotate the
horn through 90°. This is straightforward for the Q8, Q10
and Q12 models. For the Q15, the procedure is slightly
more complex; see the section below for details.
The Q44 and Q26 are designed for use
in portrait only, so you must not rotate
the horns on these models.
To rotate the horn
1. Unscrew the grille and keep the screws safe.
2. Remove the grille.
3. Unscrew the eight bolts and washers securing the
horn. Keep them safe, taking care not to drop them
into the speaker.
4. Lift the horn and rotate it 90°.
For the Q15, see the detailed
instructions below.
5. Reattach the horn using the eight bolts and washers.
6. Replace the grille and screw it back in place.
To rotate the Q15 horn
1. Follow steps 1 to 3 in the section above.
2. Position the Q15 so the top of the speaker is facing
you.
3. Put your fingers on both sides of the horn, at the end
closest to you, and lift from here. Note that the horn is
heavy.
Don't attempt to lift the Q15 horn
from the far end, as it will lock in
place and prevent you from lifting it.
4. Lift the horn a few centimeters (or inches), then
rotate it by a quarter turn while continuing to lift. This
prevents the driver from catching on the frame.
5. Rotate the horn by another quarter turn to complete
the 90° rotation.
6. Repeat the quarter turn procedure as you lower the
horn back into place.
7. Follow steps 5 and 6 in the section above to reattach
the horn and grille.
BlacklineQ User Guide
11
Bekijk gratis de handleiding van Martin Audio Blackline Q10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Martin Audio |
Model | Blackline Q10 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 4802 MB |