Marshall CV730-BK handleiding
Handleiding
Je bekijkt pagina 11 van 26
20
RS-422 connection instructions
1. Hold the two sides of RS-422 connector and pull it out i
n
t
he direction shown by the arrow in the figure below
2. Peel off a section of copper wire (AWG Nos. 28 to 18) and insert
it into the connector hole; then use flat screwdriver to fix it
3. Insert the wired RS-422 connector back to the Camera.
Now the connection is completed
21
Chapter 5 Remote Control and Setting Menu
5.1 Functions of remote control
<Remark> The below functions are listed alphabetically.
Item
Description
,
,
,
Move the lens
Back Light
Turn on/off back light compensation
Camera select
Choose Camera ID 1 ~ 3
Focus-Manual /
Far/Near
Turn on manual focus to adjust the focal
length
Focus-Auto
Auto Focus
Freeze
Freeze the screen
Home-Enter
Go back to the main page / Execute
Info
Status information
L/R Direction Set
L/R Direction / Normal
Menu
Display OSD menu
Mirror
Rotate the image (OFF / Mirror / Flip /
Rotate)
Pan/Tilt Reset
Clear the Pan / Tilt setting
Picture
Switch image effect (OFF / Neg / B&W)
Power
Power Switch
Preset
Appoint an ID (0 ~ 9) to save the current
position data
Reset
Appoint an ID (0 ~ 9) to delete the
current position data
Zoom-Fast
Adjust image size
Zoom-Slow Fine-tune image size
CV730 Manual
www.marshall-usa.com
19 20
Bekijk gratis de handleiding van Marshall CV730-BK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Marshall |
| Model | CV730-BK |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 9969 MB |
