Marshall CV630-NDIW handleiding
Handleiding
Je bekijkt pagina 17 van 25
Marshall
Chapter 6 Network Function Settings Description
6.1 Connecting Camera to Network
6.1.1 Connecting to Internet
Two common connection methods are shown below
1. Connecting via switch or router
2. To connect directly through network cable, the IP address of the computer should be
changed so that it is on the same network segment as the camera
e.g.: The factory-preset default IP address of CV630-NDI is 192.168.100.100. The
computer IP address must be set with the same network segment, such as
192.168.100.101, so that the computer can be connected correctly with the camera
Change network settings
Switch or router
Network cable
Network cable
CV630-NDI
Computer
CV630-NDI
Computer
Network cable
Marshall
6.1.2 Using the Browser to View the Images
Open the browser, and enter the URL of CV630-NDI in the IP address bar
e.g.: http://192.168.100.100 (default IP address)
Enter administrator’s account and password
*When log in for the first time, please refer to 6.2.3 Account Management to change
the default password
Marshall NDI Camera
Account: admin
Password: 9999
CV630-NDI Manual
www.marshall-usa.com31 32
Bekijk gratis de handleiding van Marshall CV630-NDIW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Marshall |
| Model | CV630-NDIW |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 8330 MB |
