Marshall CV574 handleiding
Handleiding
Je bekijkt pagina 14 van 16
5.4 System
System menu includes network conguration of the camera, account setting, and NTP
5.4.1 Network
By default, DHCP is enabled. If the network
does not support DHCP, 192.168.100.150 will be
assigned to the camera 30 seconds after the
initial boot up.
DHCP: Select DHCP or Static IP address
IP: Type desired IP address if static IP is used
Netmask: Type subnet mask address if static
IP is used
Gateway: Type gateway address if static IP
is used
DNS: Type DNS address if static IP is used
HTTP Port: Modify HTTP port number.
Default is 80
RTSP Port: Modify RTSP port number.
Default is 554
RTSP Encrypt: Enable or disable RTSP
encryption
VISCA over IP: Modify VISCA over IP port
number. Default is 52381
Conrm: When network settings are changed,
press conrm to apply changes and reboot
the camera
5.4.2 Account
Account: Change username of the camera.
Default is admin
Password: Change password of the camera.
Default is 9999
Conrm Password: Retype the new password
for conrmation
Conrm: When account settings are changed,
press conrm to apply changes
Bekijk gratis de handleiding van Marshall CV574, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Marshall |
| Model | CV574 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4661 MB |
