Makita TW002G handleiding
Handleiding
Je bekijkt pagina 11 van 88
11 ENGLISH
position in the impact socket groove to retain the pin.
To remove the impact socket, follow the installation
procedures in reverse.
►Fig.10: 1. Impact socket 2. O-ring 3. Pin
For impact socket without O-ring and pin
Only for model TW002G
Push the impact socket onto the square drive until it
locks into place.
Toremovetheimpactsocket,simplypullito.
►Fig.11: 1. Impact socket 2. Square drive 3. Ring
spring
Tool with the detent pin
For tool with rm t detent pin
Only for model TW003G
To install the impact socket, align the hole in the
side of the impact socket with the detent pin on the
square drive, and then, push it onto the square drive
untilitlocksintoplace.Taptheimpactsocketlightlyif
required.
To remove the impact socket, depress the detent pin
through the hole in the impact socket and pull the
impactsocketothesquaredrive.
►Fig.12: 1. Impact socket 2. Hole 3. Square drive
4. Detent pin
NOTE:Thermtdetentpinmayttoosecurelyto
remove the impact socket.
Inthatcase,depressthermtdetentpinfullyand
pulltheimpactsocketothesquaredrive.
Installing hook
WARNING: Use the hanging/mounting parts
for their intended purposes only, e.g., hanging the
tool on a tool belt between jobs or work intervals.
WARNING: Be careful not to overload the
hook as too much force or irregular overburden
may cause damages to the tool resulting in per-
sonal injury.
CAUTION: When installing the hook, always
secure it with the screw rmly. If not, the hook
maycomeofromthetoolandresultinthepersonal
injury.
CAUTION: Make sure to hang the tool
securely before releasing your hold.Insucient
orunbalancedhookingmaycausefallingoandyou
maybeinjured.
Thehookisconvenientfortemporarilyhangingthetool.
This can be installed on either side of the tool. To install
the hook, insert it into a groove in the tool housing
on either side and then secure it with two screws. To
remove, loosen the screws and then take it out.
►Fig.13: 1. Groove 2. Hook 3. Screw
Ring
Country specic
CAUTION: Before using the ring, always
make sure that the bracket and ring are secured
and not damaged.
CAUTION: Use the hanging/mounting parts
for their intended purposes only. Using for unin-
tendedpurposemaycauseaccidentorpersonal
injury.
The ring is convenient for hanging the tool with hoist.
First, place the rope through the ring. Then hang the
tool up to the air with hoist.
►Fig.14: 1. Bracket 2. Ring 3. Screws
OPERATION
CAUTION: Always insert the battery cartridge
all the way until it locks in place.Ifyoucanseethe
red indicator on the upper side of the button, it is not
lockedcompletely.Insertitfullyuntiltheredindicator
cannotbeseen.Ifnot,itmayaccidentallyfalloutof
thetool,causinginjurytoyouorsomeonearound
you.
Holdthetoolrmlyandplacetheimpactsocketover
the bolt or nut. Turn the tool on and fasten for the proper
fastening time.
Theproperfasteningtorquemaydierdependingupon
the kind or size of the bolt, the material of the workpiece
to be fastened, etc. The relation between fastening
torqueandfasteningtimeisshowninthegures.
►Fig.15
Model TW001G/TW002G
Proper fastening torque for high tensile bolt with
max impact mode (4)
(kgf•cm)
N•m
0
23
1
M24
M27
M24
M27
1
2
(14276)
1400
(16315)
1600
(12236)
(10197)
(8157)
(6118)
(4078)
(2039)
1200
1000
800
600
400
200
1. Fastening time (second) 2. Fastening torque
Bekijk gratis de handleiding van Makita TW002G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Makita |
| Model | TW002G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13299 MB |
