Makita TM001G handleiding
Handleiding
Je bekijkt pagina 6 van 76
6 ENGLISH
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can dier from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
Vibration
Thefollowingtableshowsthevibrationtotalvalue
(tri-axial vector sum) determined according to applica-
blestandard.
Work mode Vibration
emission (a
h
)
Uncer-
tainty (K)
Applicable
standard
Sanding 2.5 m/s
2
or
less
1.5 m/s
2
EN62841-2-4
Cutting with
plunge cut
sawblade
2.5 m/s
2
or
less
1.5 m/s
2
EN62841-1
Cutting with
segmental
sawblade
2.5 m/s
2
or
less
1.5 m/s
2
EN62841-1
Scraping 2.5 m/s
2
or
less
1.5 m/s
2
EN62841-1
NOTE:Thedeclaredvibrationtotalvalue(s)hasbeen
measured in accordance with a standard test method
andmaybeusedforcomparingonetoolwithanother.
NOTE:Thedeclaredvibrationtotalvalue(s)mayalso
beusedinapreliminaryassessmentofexposure.
WARNING: The vibration emission during
actual use of the power tool can dier from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
Declarations of Conformity
For European countries only
TheDeclarationsofconformityareincludedinAnnexA
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING Read all safety warnings, instruc-
tions, illustrations and specications provided with
this power tool. Failure to follow all instructions listed
belowmayresultinelectricshock,reand/orserious
injury.
Save all warnings and instruc-
tions for future reference.
Theterm"powertool"inthewarningsreferstoyour
mains-operated(corded)powertoolorbattery-operated
(cordless) power tool.
Cordless multi tool safety warnings
1. This power tool is intended to function for
sawing, cutting, scraping and sanding. Read
all safety warnings, instructions, illustrations
and specications provided with this power
tool.Failuretofollowallinstructionslistedbelow
mayresultinelectricshock,reand/orserious
injury.
2. Hold the power tool by insulated gripping
surfaces, when performing an operation where
the cutting accessory may contact hidden wir-
ing.Cuttingaccessorycontactinga“live”wiremay
makeexposedmetalpartsofthepowertool“live”
and could give the operator an electric shock.
3. Use clamps or another practical way to secure
and support the workpiece to a stable plat-
form.Holdingtheworkbyhandoragainstyour
bodyleavesitunstableandmayleadtolossof
control.
4. Always use safety glasses or goggles.
Ordinary eye or sun glasses are NOT safety
glasses.
5. Hold the tool rmly.
6. Make sure the application tool is not contact-
ing the workpiece before the switch is turned
on.
7. Keep hands away from moving parts.
8. Do not leave the tool running. Operate the tool
only when hand-held.
9. Always switch o and wait for the blade to
come to a complete stop before removing the
blade from the workpiece.
10. Do not touch the application tool or the work-
piece immediately after operation; they may be
extremely hot and could burn your skin.
11. Do not operate the tool at no-load
unnecessarily.
12. Always use the correct dust mask/respirator
for the material and application you are work-
ing with.
13. Some material contains chemicals which may
be toxic. Take caution to prevent dust inhala-
tion and skin contact. Follow material supplier
safety data.
14. This tool has not been waterproofed, so do not
use water on the workpiece surface.
Bekijk gratis de handleiding van Makita TM001G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Makita |
| Model | TM001G |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12012 MB |
