Makita PDC01 handleiding

332 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 16 van 332
16 ENGLISH
TROUBLESHOOTING
Beforeaskingforrepairs,conductyourowninspectionrst.Ifyoundaproblemthatisnotexplainedinthemanual,
donotattempttodismantlethetool,machine,orunit.Instead,askMakitaAuthorizedServiceCenters,alwaysusing
Makitareplacementpartsforrepairs.
State of abnormality Main power lamp Cause Remedy
The tool or machine
does not start.
The lamp lights up in
green.
The adapters are not installed to the
tool or machine.
Install the adapters to the tool or
machine.
Checkthattheadaptersareinstalled
securely.
The tool or machine, or the cords of
the adapters are overheated.
Cooldownthetoolormachine,unit
andadapter.Aftercoolingdown,
powero󰀨andthenpoweronagain.
The tool or machine, or the unit is
broken.
AskMakitaAuthorizedService
Centersforrepair.
The lamp blinks in
green.
Theplugoftheadapterorpowertool/
machine and the socket of the battery
boxarenotconnected.
Connecttheplugandthesocket.
Checkthattheplugandsocketare
connected securely.
The remaining battery capacity is not
enough.
Chargethebatteries,orreplacethe
batteries with charged ones.
Two batteries are not installed to
the unit when using the unit with the
battery-poweredtoolormachinewith
highervoltagethan18V.
The remaining battery capacity of two
batteries is not enough.
Install at least one battery to battery
port1or2,andatleastonebatteryto
batteryport3or4.
Chargethebatteries,orreplacethe
batteries with charged ones.
The unit needs to switch the battery. Switcho󰀨thetoolormachine,and
then back on.
Pressthepowerbuttonoftheunit.
The cord of the unit is overheated. Cooldowntheunit.
The lamp blinks in red
and green alternately.
The unit has detected an abnormality. Turno󰀨theunit,andthenbackon.
The tool or machine, or the unit is
broken.
AskMakitaAuthorizedService
Centersforrepair.
The lamp does not
light up.
The unit is not turned on. Turn on the unit.
The batteries are not installed to the
unit.
Install the batteries to the unit.
The remaining battery capacity is not
enough.
Chargethebatteries,orreplacethe
batteries with charged ones.
The unit is broken. AskMakitaAuthorizedService
Centersforrepair.
OPTIONAL
ACCESSORIES
CAUTION: These accessories or attachments
are recommended for use with your Makita tool
specied in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ingtheseaccessories,askyourlocalMakitaService
Center.
• Makitagenuinebatteryandcharger
• Adaptersfor36V(18Vx2)
• Adapterfor18V
• Adapterfor36V-40Vmax
NOTE:Someitemsinthelistmaybeincludedinthe
tool package as standard accessories. They may
di󰀨erfromcountrytocountry.

Bekijk gratis de handleiding van Makita PDC01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkMakita
ModelPDC01
Categoriepowerbank
TaalNederlands
Grootte56218 MB