Makita DTC303 handleiding
Handleiding
Je bekijkt pagina 6 van 144
6
ENGLISH
Applicable battery cartridge and charger
Battery cartridge BL1815N / BL1820B / BL1830B / BL1840B / BL1850B / BL1860B
Charger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF /
DC18SH / DC18WC
• Some of the battery cartridges and chargers listed above may not be available depending on your
region of residence.
• To charge the battery, please read the instruction manual for the battery charger.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Important safety
instructions for battery
cartridge
1. Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product
using battery.
2. Do not disassemble or tamper with the battery
cartridge. It may result in a re, excessive heat, or
explosion.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them
out with clear water and seek medical attention
right away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any
conductive material.
(2) Avoid storing the battery cartridge in a
container with other metal objects such as
nails, coins, etc.
(3) Do not expose the battery cartridge to water
or rain.
A battery short can cause a large current
ow, overheating, possible burns and even a
breakdown.
6. Do not store or use the tool and battery
cartridge in locations where the temperature
may reach or exceed 50°C (122°F).
7. Do not incinerate the battery cartridge even if it
is severely damaged or is completely worn out.
The battery cartridge can explode in a re.
8. Do not nail, cut, crush, throw, or drop the
battery cartridge, or allow a hard object to hit
the battery cartridge. Such conduct may result in
a re, excessive heat, or explosion.
9. Do not use a damaged battery.
10. The contained lithium-ion batteries are
subject to the Dangerous Goods Legislation
requirements.
For commercial transport e.g. by third parties,
forwarding agents, special requirements on
packaging and labeling must be observed.
For preparation of the item being shipped,
consulting an expert regarding hazardous material
is required. Please also observe possibly more
detailed national regulations.
Tape over or cover open contacts and pack up
the battery in such a manner that it cannot move
around in the packaging.
11. When disposing of the battery cartridge,
remove it from the tool and dispose of it in
a safe place. Follow your local regulations
relating to disposal of batteries.
12. Use the batteries only with products specied
by Makita. Installing the batteries to non-compliant
products may result in a re, excessive heat,
explosion, or leak of electrolyte.
13. If the tool is not used for a long period of time,
the battery must be removed from the tool.
14. During and after use, the battery cartridge
may take on heat, which can cause burns or
low-temperature burns. Pay attention to the
handling of hot battery cartridges.
15. Do not touch the terminal of the tool immediately
after use, as it may get hot enough to cause
burns.
16. Do not allow chips, dust or soil stuck into the
terminals, holes and grooves of the battery
cartridge. It may cause heating, catching re,
burst or malfunction of the tool or battery cartridge,
resulting in burns or personal injury.
17. Unless the tool supports use near high-
voltage electrical power lines, do not use the
battery cartridge near high-voltage electrical
power lines. It may result in a malfunction or
breakdown of the tool or battery cartridge.
18. Keep the battery away from children.
SAVE THESE INSTRUCTIONS.
CAUTION:
• Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries
that have been altered, may result in the battery
bursting, causing a re, personal injury and damage.
It will also void the Makita warranty for the Makita
tool and charger.
Bekijk gratis de handleiding van Makita DTC303, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Makita |
| Model | DTC303 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20506 MB |
