Makita DCL181FZ handleiding
Handleiding
Je bekijkt pagina 12 van 96
12 ENGLISH
ASSEMBLY
CAUTION: Always be sure that the tool is
switched o and the battery cartridge is removed
before carrying out any work on the tool.
CAUTION: Be sure to attach lters to the
cleaner properly. Filters with holes or those not
properly attached may allow dust to enter the motor
housing.Thismaycausemotorfailureorres.
Type of lter
Normal lter
►Fig.6: 1. Capsule 2.Prelter3. Filter
High performance lter
►Fig.7: 1. Capsule 2.Highperformancelter
Disposing of dust
CAUTION: Empty the cleaner before it
becomes too full, or the suction force weakens.
CAUTION: Be sure to empty out the dust
inside the cleaner itself. Failure to do so may
cause the lter to be clogged or the motor to be
damaged.
Inordertodropduststickingonthelterinthecapsule,
tap the capsule 4 or 5 times with your hand.
►Fig.8
Point the suction inlet downwards, turn the capsule in
direction of the arrow as illustrated, and disconnect the
capsule slowly and straight.
►Fig.9: 1. Capsule 2. Suction inlet
Remove dust accumulated inside the capsule.
NOTE: Dust may spill out when capsule is opened, so
be sure to set a garbage bag beneath capsule.
Cleaning lters
Normal lter
Turntheprelterinthedirectionofthearrowtodetachit
fromthecleaner.Thencleannedustotheprelter.
►Fig.10: 1.Prelter
Pullothelterandlightlytapittoremovedust.
►Fig.11: 1. Filter
High performance lter
Turnthehighperformancelterinthedirectionofthe
arrowtodetachitfromthecleaner.Thencleannedust
othehighperformancelter.
►Fig.12
Reassembly
NOTICE: Install lters as instructed in this man-
ual before operation. If the problems as following
describedoccur,repositionthelterscorrectlyto
rectify the problems.
NOTE: Always remove dust ahead of time, as the
suction power will be reduced if there is too much
dust in the cleaner.
Normal lter
1. Putonlteruntilitisfullyinpositiononthecleaner
unit.
►Fig.13: 1. Filter
NOTICE: Install the lter straight onto the stay.
Besuretosmooththelterevenlyacrossthestay,
anddonotletitlooseorwrinkleandaecttheuse.
2. Installtheprelter.Turntheprelterinthedirec-
tion of the arrow until it stops.
►Fig.14: 1.Prelter
NOTE:Makesurethatsecuringlipsarermlylocked
in the cleaner unit.
Problem Examples
Example1:Onlytheprelterhasbeenattached(no
lter)
►Fig.15: 1.Prelter
Example2:Onlythelterhasbeenattached(no
prelter)
►Fig.16: 1. Filter
Example3:Thelterhasbeenplacedwrinkledorloose.
►Fig.17: 1. Filter
Example4:Prelter'ssecuringlipisnotrmlylocked
into groove of cleaner housing
►Fig.18: 1. Groove of cleaner housing 2.Prelter
3. Securing lip
High performance lter
Connecthighperformancelter.Turnthehighperfor-
manceltertoholdthesecuringlipsintothegroovesin
the cleaner housing.
►Fig.19: 1.Highperformancelter2. Securing lip
►Fig.20: 1. Securing lip
NOTE:Makesurethatthehighperformancelteris
secured in the cleaner unit.
Problem Examples
Securinglipofhighperformancelterisnotrmly
locked into groove of cleaner housing.
►Fig.21: 1. Securing lip 2. Groove of cleaner housing
Closing the capsule
Align the mark on the capsule with that near the handle,
and then turn the capsule in direction of the arrow until it
is secured in place.
►Fig.22: 1. Mark
Bekijk gratis de handleiding van Makita DCL181FZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Makita |
| Model | DCL181FZ |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 13447 MB |
