Makita CA5000 handleiding
Handleiding
Je bekijkt pagina 6 van 64
6 ENGLISH
ENGLISH (Original instructions)
SPECIFICATIONS
Model: CA5000
Groove cutter blade diameter 118.0 mm
Circular saw blade diameter 165.0 mm
Max. cutting depth (with groove cutter blade) 11.0 mm
Max. cutting depth (with circular saw blade) 36.0 mm
No load speed 2,200 - 6,400 min
-1
Overall length 346 mm
Net weight 4.7 kg
Safety class
/II
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydierfromcountrytocountry.
• Weight according to EPTA-Procedure 01/2014
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
DOUBLE INSULATION
Wear eye protection.
Groove cutter blade
Circular saw blade
Only for EU countries
Due to the presence of hazardous compo-
nents in the equipment, used electrical and
electronic equipment may have a negative
impact on the environment and human
health.
Do not dispose of electrical and electronic
appliances with household waste!
In accordance with the European Directive
on waste electrical and electronic equip-
ment and its adaptation to national law,
used electrical and electronic equipment
should be collected separately and
delivered to a separate collection point
for municipal waste, operating in accor-
dance with the environmental protection
regulations.
This is indicated by the symbol of the
crossed-out wheeled bin placed on the
equipment.
Intended use
The tool is specially intended for cutting groove into
composite boards made from aluminum, plastic, mineral
contained plastic, and similar materials.
If the tool is equipped with proper circular saw blade,
the tool can be used for sawing wood and aluminum.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-5:
Sound pressure level (L
pA
) : 91 dB (A)
Sound power level (L
WA
) : 99 dB (A)
Uncertainty (K) : 3 dB (A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
Bekijk gratis de handleiding van Makita CA5000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Makita |
| Model | CA5000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9333 MB |
