Mahlkönig E80T handleiding
Handleiding
Je bekijkt pagina 37 van 44
Fault Cause Remedy
The grinder is
humming but
not grinding.
• The grinding
mechanism is
clogged.
t Release the lock on the grind adjust-
ment and set the grinding degree to
“10”.
Start the grinding process.
The grinder clears itself.
Then set the grind adjustment to the
seng required during operaon.
• Ground coee
has built up
in the grinder
because of too
much coee in
the portalter.
t Clean the spout system
(see chapter “Cleaning the spout sys-
tem”).
Release the lock on the grind adjust-
ment and set the grinding degree to
“10”.
Start the grinding process.
The grinder clears itself.
Then set the grind adjustment to the
seng required during operaon.
• The grinding
degree is too
ne.
t Release the lock on the grind adjust-
ment and set the grinding
degree to “10”.
Start the grinding process.
The grinder clears itself.
Then set the grind adjustment to the
seng required during operaon.
• A foreign
object is in
the grinding
mechanism.
t Clean the grinding mechanism as
described in the “Cleaning” secon
and remove the foreign object as you
do so. If the foreign object cannot be
removed, contact your service partner
(see the secon “Maintenance and
service”).
The grinder is
not grinding
ne enough.
• The burrs are
worn out or
require read-
justment.
t Clean/change the burrs or zero in the
burrs
(see “Cleaning/changing the burrs”;
“Zeroing in the burrs”).
37
E80S | ENESPRESSO GRINDER
36
Bekijk gratis de handleiding van Mahlkönig E80T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mahlkönig |
| Model | E80T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4464 MB |
