Mahlkönig E80T handleiding
Handleiding
Je bekijkt pagina 29 van 44
Cleaning the grinder installaon surface
1. Switch o the grinder (On/O switch (5) to “0”) and remove the power
plug from the socket.
2. Li the grinder by the casing using both hands and place it onto a clean
surface.
3. Clean the surface and the underside of the grinder with a damp cloth
and dry the surfaces.
The surfaces must be dry and free of oil and grease.
4. Place the grinder back onto the cleaned surface.
Cleaning the casing
1. Switch o the grinder (On/O switch (5) to “0”) and remove the power
plug from the socket.
2. Use a brush to clean the following grinder components:
• the spout (13),
• the portalter intake (12),
• the start buon (11),
• the portalter support (10),
• the screws (8) for adjusng the portalter support (le and right).
3. Pull the collecng tray (9) forward and out of the grinder.
Wipe the casing and the collecng tray with a damp cloth as required,
but at least once a week.
Cleaning the spout system
The manufacturer recommends using a brush with nylon bristles
to clean the spout system.
1. Pull the spout (13) downwards out of the lock (see Fig. H).
2. Carefully clean the outlet on the grinder casing with a brush.
3. Clean the spout with a damp cloth and then dry it.
Be careful not to damage the surface of the spout.
Fine scratches can negavely impact the grinding result, as
espresso grinds adhere to the scratches, which can, in turn, lead
to uctuaons in dosing amount.
29
E80S | ENESPRESSO GRINDER
28
Bekijk gratis de handleiding van Mahlkönig E80T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mahlkönig |
| Model | E80T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4464 MB |
