Mahlkönig E80T handleiding
Handleiding
Je bekijkt pagina 23 van 44
Starng grinding
Grinding according to a recipe
1. Select the desired recipe by turning the controller (3) (see the “Selecng
recipes” chapter).
2. Insert the portalter between the portalter intake (12) and the portal-
ter support (10) unl it touches the start buon (11).
The grinder starts the grinding process automacally, it runs for the set
grinding me and then stops. During the grinding process, the remaining
grinding me is shown on the display (14).
3. The LED lighng changes to green and signals that the grinding process
has been completed.
Remove the portalter.
Manual grinding
Using the start buon
1. Insert the portalter between the portalter intake (12) and the portal-
ter support (10) unl it touches the start buon (11).
The grinder starts the grinding process automacally when the start but-
ton is triggered. During the grinding process, the remaining grinding me
is shown on the display.
2. Remove the portalter from the portalter intake when you wish to end
the grinding process before the grinding me is up.
Using the upper buon
1. Insert the portalter between the portalter intake (12) and the portal-
ter support (10) unl before it touches the start buon (11).
2. Press the upper buon (21) to trigger the grinding process manually.
3. End the grinding process by no longer pressing and holding the upper
buon.
Manual grinding using the upper buon or the start buon al-
lows you to add very small quanes of ground coee to a shot
when grinding using a recipe.
23
E80S | ENESPRESSO GRINDER
22
Bekijk gratis de handleiding van Mahlkönig E80T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mahlkönig |
| Model | E80T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4464 MB |
