Mahlkönig E65T handleiding
Handleiding
Je bekijkt pagina 29 van 36
29
E65S | EN
Problem Cause Remedy
The grinder is
humming but
not grinding.
• The grinding
mechanism is
blocked.
Release the lock on the grinding
degree adjuster and set the grinding
degree to “8”.
Start the grinding process.
The grinder will clear itself.
Then adjust the grinding degree se ng
to the grinding degree required during
opera on.
• Ground coff ee
has built up
in the grinder
due to over-
fi lling of the
portafi lter.
Clean the outlet system
(see “Cleaning the outlet system”
sec on).
Release the lock on the grinding
degree adjuster and set the grinding
degree to “8”.
Start the grinding process.
The grinder will clear itself.
Then adjust the grinding degree se ng
to the grinding degree required during
opera on.
• The grinding
degree is too
fi ne.
Release the lock on the grinding
degree adjuster and set the grinding
degree to “8”.
Start the grinding process.
The grinder will clear itself.
Then adjust the grinding degree se ng
to the grinding degree required during
opera on.
• A foreign
object is
in the grinding
mechanism.
Clean the grinding mechanism as
described in the “Cleaning” sec on
and remove the foreign object. If the
foreign object cannot be removed, con-
tact your supplier (see “Maintenance
and service” sec on).
Bekijk gratis de handleiding van Mahlkönig E65T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mahlkönig |
| Model | E65T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3602 MB |
