Mahlkönig E65T handleiding
Handleiding
Je bekijkt pagina 17 van 36
17
E65S | EN
OperaƟ on
NOTE!
Risk of overheaƟ ng!
Exceeding the maximum permissible opera ng cycle can cause the
grinder to overheat.
– Do not exceed the maximum opera ng cycle
(see “Technical data” sec on).
– Observe the recommended break when the maximum permissi-
ble opera ng cycle is reached (see “Technical data” sec on).
• The grinder has a thermal overcurrent circuit-breaker which
interrupts the electric circuit of the grinder in case of electri-
cal overload.
To use the grinder again, fi rst set the On/Off switch (5) to
switch posi on 0 (off ).
Then push the release bu on (6) in.
You can now switch the grinder on by se ng the On/Off
switch to switch posi on I and resume using the grinder (see
“Troubleshoo ng” sec on).
• The grinder also has a motor protector, which switches off
the grinder when the motor becomes too hot.
As soon as the motor has cooled down, the grinder can be
put into opera on again (see “Troubleshoo ng” sec on).
NOTE!
Risk of damage!
The operator cannot adjust the thermal overcurrent circuit-breaker. If
the circuit-breaker has been triggered several mes, a service partner
must be contacted for advice as the motor winding may be damaged.
Bekijk gratis de handleiding van Mahlkönig E65T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mahlkönig |
| Model | E65T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3602 MB |
