Mahlkönig E65T handleiding
Handleiding
Je bekijkt pagina 15 van 36
15
E65S | EN
Seƫ ng up the grinder and inserƟ ng the bean container
You will need a slot screwdriver to fi x the bean container (not
supplied).
1. Place the grinder on a level and stable surface that does not vibrate.
2. Ensure that the outlet (13) is pushed as far upwards as possible and en-
gages securely in the outlet lock (see Fig. D).
3. Make sure that the grinder is switched off (On/Off switch (5) to “0” posi-
on) and connect the grinder to the power supply by inser ng the power
plug into a properly installed earthed socket.
4. Place the drip tray (9) into the corresponding casing recess below the
outlet.
5. Make sure that the rubber ring (18) has been properly inserted in the
bean container intake (2) and is lying fl at (see Fig. B).
6. Posi on the bean container (1) on the bean container intake.
When posi oning the bean container intake, ensure that the nose of
the bean container is located in the corresponding recess in the bean
container intake.
7. Push the bean container down slightly into the bean container intake and
rotate the bean container clockwise to lock it in place on the grinder.
If the bean container cannot be fi xed in place by rota ng it, it may not
be posi oned correctly. Align the bean container correctly (see step 6)
and try again to fi x it in place by rota ng it (see also “Troubleshoo ng”
sec on).
8. Use a slot screwdriver to ghten the locking screw (19) for the bean
container clockwise.
The grinder switches off automa cally when the bean container
is not inserted.
Bekijk gratis de handleiding van Mahlkönig E65T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mahlkönig |
| Model | E65T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3602 MB |
