Mahlkönig E65T GBS handleiding
Handleiding
Je bekijkt pagina 23 van 32
23
E65T GbS | EN
3. Clean the installation surface and the underside of the grinder with a
damp cloth and dry the surfaces.
The surfaces must be dry and free of oil and grease.
4. Place the grinder back onto the cleaned surface.
Cleaning the casing
1. Switch off the grinder (on/off switch(4) in the 0 position) and pull the
power plug (5) out of the socket.
2. Clean the following parts of the grinder with a brush:
• Spout(11)
• Portafilterintake (10)
• Portafilter support(9)
• Screws (7) for adjusting the portafilter support (left and right).
3. Pull the collecting tray(8) forward and out of the grinder.
Wipe the casing and the collecting tray with a damp cloth as necessary,
but at least once a week.
4. Then refit all of the parts removed for cleaning.
Cleaning the spout system
The spout system should be cleaned once a week.
The manufacturer recommends using a brush with nylon bristles
to clean the spout system.
1. Pull the spout (11) downwards out of the lock (see Fig.G).
2. Clean the spout on the casing (spout lock) with a brush.
3. Clean the spout with a damp cloth and then dry it.
4. Place the spout back on the grinder by carefully pushing it upwards in
the intake until the lock (see Fig.D) engages.
Ensure that you do not damage the surface of the spout. Fine
scratches can have a negative effect on the grinding results,
as ground coffee adheres to the scratches, which can cause
fluctuations in dispensing.
Bekijk gratis de handleiding van Mahlkönig E65T GBS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mahlkönig |
| Model | E65T GBS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2448 MB |
