Mahlkönig E65T GBS handleiding
Handleiding
Je bekijkt pagina 18 van 32
18
Coffee grinder
Adding the coffee beans
1. Remove the lidfrom the bean hopper(1).
2. Pour whole roasted coffee beans into the bean hopper from above.
The maximum fill amount should be approx. 1cm below the edge
of the bean hopper.
The minimum filling quantity should be approx. 1 cm above
the finger protection to ensure there are no fluctuations in the
dispensing.
3. Place the lid back onto the hopper.
4. If required, open the bean hopper by pulling out the slider (17) (see Fig.B).
You can use the clip (13) on the lid of the bean hopper to attach a
label or something similar to indicate the type of espresso beans
currently used in the grinder.
Changing the coffee bean type
1. Remove the bean hopper (1) from the grinder (see p.16 “Removing the
hopper“).
Ensure that the bean hopper is closed towards the grinding mechanism
and the beans left in the grinding mechanism have been completely
ground before you remove the bean hopper.
2. Remove the leftover coffee beans from the bean hopper.
3. Remove any excess beans from the bean hopper intake(15) and make
sure that the seal ring(14) is correctly inserted and lying flat (see Fig.B).
4. Reinsert the bean hopper (1) and fix it with the securing screw (16)
(see p.16 “Inserting the hopper“).
5. Pour the new coffee beans into the bean hopper.
6. Open the bean hopper by pulling out the slider (17).
7. Grind 2–3 shots to remove any residue of the old coffee beans, warm up
the machine and prevent any fluctuations in dispensing the beans.
Bekijk gratis de handleiding van Mahlkönig E65T GBS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mahlkönig |
| Model | E65T GBS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2448 MB |
