Magic FX PSYCO2JET handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142/ 42

Afdrukken

Je bekijkt pagina 9 van 42

MAGICFX

®

PSYCO2JET — User and Installation Manual 9

Menu function Explanation

Lock/Unlock

Controller

Holding the Lock button for more than 5 seconds will “lock” the

display functions. Meaning buttons will not respond. This to avoid

accidental change of parameters via display.To unlock, hold the

Unlock button for more than 5 seconds.

Reset Errors

In case there is a locking error present, this button will reset the

appliance. If the fault does not persist, the locking error will not

reappear.

DMX Start

Address

(1-509/510)

Setting the DMX start address.

DMX Safety

Address (1-512)

Setting the DMX safety address.

Control Mode

(RAW/PRESET)

Switch between modes RAW and PRESET.

DMX Footprint

(Fixed)

This parameter indicates the DMX footprint, in other words the

amount of sequential channels used by the appliance. This does

not include the safety channel.

RDM (On/O) This function turns on/o the RDM functionality.

Nozzle Mirror

Function

(On/O)

Mirror the nozzle direction commands.

Nozzle Block

Le (140-255)

Block part of the nozzle rotation range in its le hand swing.

Nozzle Block

Right (0-116)

Block part of the nozzle rotation range in its right hand swing.

Nozzle

Calibration

(-5 - 5)

This parameter can be used to calibrate the nozzle so its swing is

fully symmetrical.

Output When

Blocked

(On O)

This parameter is only applicable in the PRESET mode. When the

nozzle is partly blocked by either “Nozzle block le“ and/or “Nozzle

block right” parameters. The CO2 eects that fall into the range

that is blocked are either shown on the limit of the range block

angle (Output When Blocked = On) or le out (O).

Display Dimmer

(On/O)

Turn display dimmer on or o. If turned on, the display is dimmed

automatically 30 seconds aer the last button push.

Display Flip

(On/O)

Change display orientation from normal to up side down.

Factory

Defaults (Yes/

No)

Restores the appliance factory default settings.

123456789101112131415161718192021222324252627282930313233343536373839404142/ 42

Bekijk gratis de handleiding van Magic FX PSYCO2JET, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Magic FX (Niet gecategoriseerd)

Handleiding bekijken

Magic FX Stadiumshot II

Niet gecategoriseerd - handleiding

Handleiding bekijken

Magic FX CO2 JET II

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd